How to Install
Why do you have Hydrostatic Release units on board your vessel? What happens inside an HRU when exposed to hydrostatic pressure?
The installation of an HRU is preferably performed by a raft service technician, the material in this lessons show you what to look for when checking for a correct installation.
Hopefully, in the unfortunate event, an abandon ship is necessary the HRU will not be used. Instead, a manual release with a release hook is favourable. The Easy Release for H20 is an accessory that will make this significantly easier and safer.
Why do you have Hydrostatic Release units on board your vessel? What happens inside an HRU when exposed to hydrostatic pressure?
The installation of an HRU is preferably performed by a raft service technician, the material in this lessons show you what to look for when checking for a correct installation.
Hopefully, in the unfortunate event, an abandon ship is necessary the HRU will not be used. Instead, a manual release with a release hook is favourable. The Easy Release for H20 is an accessory that will make this significantly easier and safer.
Seably works better with cookies. By accepting, you agree to our use of cookies.
Read more or useStep 1 of 3•1 minute video
In order for the HRU to work as intended, it is of the highest importance the black part of the HRU is connected to a strong point on the deck or cradle.
The rafts Painter Line must be connected to the red WeakLink connector by the means of a knot or a shackle.
Are you sure to perform this action?